| Just drop it in the tank. The Fitch Fuel Catalyst
will transform the fuel in your outdoor power equipment
so that it will burn cleaner and more efficiently for
12,000 operating hours, virtually the life of your equipment.
KEEPS FUEL FRESH FOR EASIER
STARTING
No longer will you deal with a hard-starting machine.
The Fitch Fuel Catalyst replaces the need to purchase
expensive fuel stabilizers that must be added time
and time again. Once dropped in the tank, it will
keep every tank of fuel fresh for improved combustion.
HOW IT WORKS
No matter the age and condition of your equipment,
all fuel used in outdoor power equipment possesses
elements (organic compounds) that cause ignition problems.
Some of these elements burn too fast causing pre-ignition.
Some compounds burn too slowly causing delayed ignition,
excessive smoke and carbon build-up. The Fitch Fuel
Catalyst works on these troublemakers to improve the
fuel. The catalyst alloy helps to refine the degraded
elements of the fuel so it will burn cleaner and with
improved efficiency resulting in a machine that starts
easier, and experiences less smoke, carbon build-up
and plug fouling.
IMPROVES FUEL SAVINGS, LESS
TOXIC EMISSIONS
Because fuel burns cleaner and more efficiently with
use of the Fitch Fuel Catalyst, emissions of HC, CO
and NOx are reduced and fuel economy is improved.
Actual fuel savings will vary depending upon the type
and age of the equipment, its mechanical condition
and how it is used.
PROVEN TECHNOLOGY
Tested and proven for over 15 years by numerous universities
and independent laboratories around the world, the
Fitch Fuel Catalyst is the only fuel treatment device
on the market that can deliver fuel freshness, decreased
emissions and improved performance with one drop-in
treatment.
IMPROVES ALL 2-STROKE &
4-STROKE ENGINES
The Fitch Fuel Catalyst works on any hydrocarbon-based
fuel (gas, diesel, propane) and works equally well
with both 2 and 4 stroke engines. The Fitch Fuel Catalyst
can be used in any outdoor power equipment such as
lawn mowers, blowers, trimmers, chain saws and more.
The F2-T is used for all hand-held applications and
for engines under 3.5 hp. The F4-T has been formulated
to work on all applications 3.5 hp and up, not exceeding
6 gallons of fuel capacity.
|
